Officiel Raspberry Pi 7" Touchscreen Display Expand

Officiel Raspberry Pi 7" Touchscreen Display

Raspberry Pi Raspberry Pi

RASPBERRYPI-DISPLAY

Ny

Raspberry Pi LCD-berøringsskærm - 7 tommer

Raspberry Pi har sin helt egen officielle LCD-berøringsskærm. Raspberry Pi Foundation ønskede den perfekte skærm til dit Pi uden at gå på kompromis.

KOMPATIBEL MED:

Raspberry Pi - Model A+
Raspberry Pi - Model B+
Raspberry Pi 2 - Model B

Flere detaljer

Denne vare er ikke længere på lager

527,20 DKK

ekskl. moms

Gratis fragt ved køb over 499kr

2-3 dages levering

30 dages fuld returret

Sikker online betaling

Ved at købe denne vare kan du samle op til 52 loyalitetspoint. Din kurv total 52 point som kan konverteres til en rabatkupon lydende på 10,40 DKK.

The eargerly awaited 7" Official Raspberry Pi Touchscreen Display is finally here! Boasting a neat 800×480 display @ 60fps resolution, and 10 point capacitive touchscreen, this 7" screen for the Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects.

The 800x 480 display connects via an adapter board which handles power and signal conversion.Only two connections to the Pi are required; power from the Pi’s GPIO port and a ribbon cable that connects to the DSI port present on all Raspberry Pi’s. Touchscreen drivers with support for 10-finger touch and an on-screen keyboard are available on the latest Raspbian OS for full functionality without a physical keyboard or mouse.

  • Turn your Raspberry Pi into a touchscreen tablet, infotainment system, or standalone device.
  • Truly Interactive - the latest software drivers will support a virtual ‘on screen’ keyboard, so there is no need to plug in a keyboard and mouse.
  • Make your own ‘Internet of Things’ (IoT) devices including a visual display. Simply connect your Raspberry Pi, develop a Python script to interact with the display, and you’re ready to create your own home automation devices with touchscreen capability.
  • A range of educational software and programs available on the Raspberry Pi will be touch enabled, making learning and programming easier on the Raspberry Pi.
  • Raspberry Pi mounting points on the back

Technical Specification:

  • 7” Touchscreen Display.
  • Screen Dimensions: 194mm x 110mm x 20mm (including standoffs)
  • Viewable screen size: 155mm x 86mm
  • Screen Resolution 800 x 480 pixels
  • 10 finger capacitive touch.
  • Connects to the Raspberry Pi board using a ribbon cable connected to the DSI port.
  • Adapter board is used to power the display and convert the parallel signals from the display to the serial (DSI) port on the Raspberry Pi.

N.B. Will require the latest version of Raspbian OS to operate correctly.

Kit Contents:

  • 7” Touchscreen Display
  • Adapter Board
  • DSI Ribbon cable
  • 4 x stand-offs and screws (used to mount the adapter board and Raspberry Pi board to the back of the display
  • 4 x jumper wires (used to connect the power from the Adapter Board and the GPIO pins on the Pi so the 2Amp power is shared across both units)

Please Note. The Raspberry Pi Board and accessories are not included in this kit.

Notes

The display will technically work with the Model A and Model B boards (connecting it to the DSI port on the Pi board), however the mounting holes on the back of the display will only line up with the newer board design (A+, B+ and Pi2)

Egenskaber og fordele ved Pi LCD-berøringsskærm
• Multi-touch kapacitiv berøringsskærm — understøtter op til 10 fingerberøringer
• 7 tommer skærm
• 800 x 480 pixel opløsning ved 60 billeder pr. sekund (fps)
• 24-bit RGB-farve
• 70° betragtningsvinkel
• Kræver kun to tilslutninger
• Fleksibel strømforsyning
• Ingen elektronisk interferens
• Fuld Raspbian OS-funktionalitet uden tastatur og mus
• Udviklingssoftware til Kivy-berøringsskærm kan leveres — http://kivy.org/docs/installation/installation-rpi.html

Indhold af LCD-berøringsskærm
• LCD-berøringsskærm
• Adapterkort
• DSI-fladkabel
• 4 kortslutningsledninger
• Monteringsdele

Opsætning af din LCD-berøringsskærm
Opsætning er nemt og hurtigt. Adapterkortet og din Pi monteres på bagsiden af lysdioden med brug af det medfølgende beslag. DSI-fladkablet giver skærminterface mellem din Pi og lysdiodemodulet.

Accept

Vi bruger cookies til at sikre, at vi giver dig den bedste oplevelse på vores websted. Hvis du fortsætter med at bruge webstedet uden at ændre dine indstillinger, antager vi, at du er tilfreds med at modtage alle cookies på webstedet. Du kan få flere oplysninger om cookies, og hvordan du administrerer dine indstillinger for cookies ved at klikke her.